Are There Any Disadvantages to Home Solar in CT? | The Pros and Cons of Residential Solar Installation

There are actually very few disadvantages to investing in home solar in CT! The advantages of residential solar power systems often make them an excellent choice for anyone, even with their few drawbacks.

If you’ve been considering solar panel installation for your property, note a few disadvantages of residential solar power. You might also consider all the reasons why solar is an excellent choice for every homeowner. Discuss your solar panel installation needs with the experts at Home Solar CT (homesolarct.com) so you can make the right decision for your property’s power needs!

What Are the Disadvantages of Home Solar in CT?

There are only a few disadvantages to home solar in CT, as said. One is the purchase price; most solar panels range from $200 to $250 or more per panel, and an average homeowner might need 25 to 35 panels to become independent of city-supplied power.

Many homeowners, however, might only invest in 15 to 20 panels, to reduce rather than outright eliminate their overall energy costs. In turn, you might pay anywhere from $3000 to $7500 or more for a solar power system.

Another disadvantage of solar power systems is that they need sunlight to generate power. Homes in areas with long winters or lots of cloudy weather, or a house surrounded by mature trees and other obstructions, might not collect much sunlight. Those solar panels can then fail to produce enough power to justify their overall cost.

While not an actual disadvantage, note that some residential roofs aren’t good candidates for solar panel systems! Roofs with lots of peaks and gables, dormers, or other similar architecture might not have enough space for all the solar panels you need.

A solar power system also needs to be removed to allow access for roof repairs and new roof installation. If your home’s roof is in disrepair, it’s best to address those needed fixes or invest in a new roof altogether before scheduling solar panel installation.

Home Solar CT, Why the Pros Outweigh the Cons

While home solar in CT might not be the right choice for everyone, solar panel pros far outweigh their cons in most cases! Before you decide that solar panel installation is not right for your home, note a few reasons why you should consider strongly solar for your property:

·       Most homeowners can expect to save between $10,000 and $30,000 over the lifetime of solar panel ownership! (https://news.energysage.com/much-solar-panels-save/) Even if you don’t save quite that much money, pocketing a few hundred or just a thousand dollars every year because of reduced electric bills makes solar panel installation an excellent investment.

·       Investing in solar can also allow you to upgrade your home’s appliances without the worry of increased electric bills. For example, you might want a larger refrigerator in the kitchen, a sump pump in the basement, or a heated pool outdoors. Solar panel installation will keep your electric bills to a minimum even with all that added power consumption.… Read More..

What’s the Difference Between Mold Cleanup and Mold Remediation in Dallas?

After a flood or fire, your restoration contractor might recommend mold remediation for a Dallas property. Floods, and the copious amounts of water used to extinguish fires, can lead to mold growth rather easily, often in places unseen such as behind walls and underneath carpeting or other flooring. Mold can then mean health problems and costly secondary damage throughout your property.

Before you schedule water damage restoration and repair, you might wonder the difference between mold cleanup and remediation services, and which is needed for your property. Check out a few vital differences between these two and what’s involved in both services, and why you might schedule them for your home or business. 24/7 Water Damage Restoration Dallas (Visit Website), a leading provider of water damage repair offers services that can address mold problems in your property.

Cleanup Versus Mold Remediation in Dallas

The term remediation refers to correcting something that is wrong or defective. Mold remediation then refers to correcting circumstances that create the risk of mold growth.

Cleanup, on the other hand, refers to removing mold after it’s appeared and spread. Mold damage repair is needed if mold has spread so severely that a contractor needs to replace framing and other materials, rather than simply cleaning them.

Mold remediation for Dallas properties is often scheduled after a flood, fire, or other such disaster. Remediation corrects particular risks for mold growth; for example, your restoration contractor might employ heavy-duty dehumidifiers, to ensure proper drying of building materials such as carpets, flooring, and drywall. Dehumidifiers also remove excess humidity in the air so that it doesn’t cling to walls and floors and encourage mold growth.

Remediation might also ensure affected surfaces are exposed to light and fresh air circulation. This can include pulling up carpeting to expose wet backing, opening cupboard doors so walls behind them are exposed to light, and using fans to dry the space and increase air circulation.

Even with the best safeguards in place, remediation might not stop mold from growing. Part of the process of protecting your property then includes monitoring for signs of excess mold growth and cleaning that mold quickly before it can spread. Your contractor will also monitor humidity levels and check for lingering dampness around framing, subflooring, carpeting, drywall, and other surfaces and materials.

When Your Property Needs Mold Remediation in Dallas

If your property has been through a flood or fire, you’re no doubt already stressed and anxious and eager to get back to a normal routine. However, it’s vital to remember that drywall, wood framing, carpeting and its underlying backing, and other such materials absorb water quickly. It also doesn’t take long for mold to then form, often starting to grow and spread within just a day or two!

Property owners should also note that it doesn’t require much excess moisture for materials to become damp enough for mold to grow. Mold is especially common in areas without light and fresh air circulation, so even a small … Read More..

Do You Need Paver Sealing in Sarasota? | A Homeowner’s Guide

If you have an outdoor patio, pool deck, or stone walkway, it’s vital that you schedule regular paver sealing in Sarasota. Sealing offers many benefits for homeowners and can mean saving money in the long run, avoiding otherwise unnecessary damage and fading!

Some homeowners put off needed paver sealing in Sarasota simply because they don’t understand its benefits, or don’t even realize that outdoor surfaces need sealing. To ensure you’re keeping your property in good condition and looking its best, consider some vital information about sealing for paver stones, flagstone, brick, concrete, and other such materials, including why it’s needed for your property.

What Is Paver Sealing for Sarasota Properties?

Sarasota paver sealing includes a thin layer of material applied over pavers, flagstone, and other exterior materials. This liquid or gel material then dries and hardens, to create a barrier against etching, scratching, fading, chipping, and other damage.

Paver sealing is similar to nail polish and paint topcoats, or fabric protection you might spray onto your furniture. Paver sealant helps repel water and surface grit, keeping materials looking like new and avoiding damage.

Do You Need Paver Sealing in Sarasota?

All exterior paving materials need regular sealant; this includes concrete, asphalt, brick, pavers, flagstone, and wood. Sealing helps avoid water damage, staining, and fading, as well as damage from drying air pollution residues, airborne pool chlorine, and soot.

While regular sealing is vital for pavement and paving materials on any property, it’s especially important for Sarasota properties! The city’s close proximity to the Gulf of Mexico often means layers of sand, silt, and other gritty debris settling onto outdoor pavers, flagstone, brick, and concrete. That grit is then ground into all those surface pits and pores, risking etching and scratching.

Nearby Tampa Bay International Airport, as well as the many marinas in and near the city, also mean layers of soot and air pollution settling onto pavers and exterior surfaces. This drying soot can fade those materials, drying them and risking breakage and splitting, and other costly damage.

Chlorine residue from the many pools in the city can also become airborne and settle onto outdoor pavers! Florida’s hot summertime sun can also fade and dry pavers more quickly than those in other states without constant sun exposure.

Regular paver sealing in Sarasota protects your beautiful patio, pool deck, walkways, and other surfaces from premature damage including etching, breakage, and fading. This work is especially vital in Sarasota and surrounding areas, given the added wear and tear your pavers suffer throughout the year! To ensure those surfaces look their best and last as long as possible, invest in regular sealing for your property.

How Often Do You Need Paver Sealing in Sarasota?

The rule of thumb for paver sealing is every 3-5 years, but since pavers in Sarasota often suffer added wear and tear than those on other properties, you might consider sealing every 2-3 years instead! Your paver sealing contractor can also note the overall condition of your pavers … Read More..

What are The Different Roof Installation Methods?

One important thing to look out for when building a house is the roof installation method. The roof installation method and the type of roof go a long way in determining how appealing the house will be. It adds to the aesthetics and charm of the house. When it comes to the roofing of a house, a plethora of options is available.

It’s therefore imperative to have a deep understanding of these installation methods and be conversant with the differences between these installation methods. One of the hardest decisions to make when building a house is choosing the best roofing system. It’s not just a decision one can make without knowing the technical know-how of these installation methods. It’s a technical decision and choosing or making the right decision may seem hard but far from impossible.

Another factor to consider when choosing the right installation method is the effect it will have in the nearest or distant future. Apart from the two factors mentioned above, it’s important to note that before choosing a roof installation method, it behooves the homeowner to choose the right roof installation company to do the job.

Unbiased reviews and the right information about these roof installation companies can be gotten from review sites like ReviewsBird.com. This will equip the homeowner with the necessary information that will enable him or her to choose a good roofing installation company.

Methods of roof installation

The different methods of roof installation include: exposed fastener system, concealed fastener system, concealed adhesive fastening system

Exposed Screw Fastener Metal Roofing Systems

This is the first installation method. It’s important to note that professional services companies that can do this roof installation with precision, accuracy, and utmost efficiency and reliability are out there. A little bit of research is what will be needed to pick the right one.

The visible screw fastener that penetrates roofing materials is called exposed fasteners. This method comes with a disadvantage because the screws used during installation are not concealed and because they are exposed, they tend to rust over time. The exposed screws also become loose over time because they are exposed to a temperature that makes them expand and contract.

This repetitive movement puts huge pressure on the screws which makes them back out i.e. become loose. This creates openings in the roof which leads to leaking. This problem often discourages homeowners from using this method. The advantage of using this method is that it saves cost

Concealed Screw Fastener Metal Roofing Systems

Concealed Fastener Systems are also called (standing seam systems). It is more expensive than the exposed screw fastener roofing system. This method conceals the screw but it comes with its disadvantages too. The standing seam roof is open to fastener stress which gives rise to unsightly oil can dimpling of the metal panels. Although this method is cost-effective, it’s arduous and burdensome.

Concealed Adhesive Roofing Systems

Concealed Adhesive roofing systems are a cutting-edge method of roof installation. It was designed to … Read More..

Landscaping Projects to Prepare for Spring

Spring is upon us! It’s time for homeowners all over Oregon to take a look at their to do list for maintaining their yard.  Due to cold and rainy conditions, a lot of landscaping projects are delayed during the winter months. This means there is plenty to do to get your yard Spring and Summer ready.

For starters, the storms and winter weather surely have left debris in your yard. From fallen tree branches to piles of leaves, this is the time to give your yard a good clean up. If you’re unable to do it yourself or if you opt to have a landscape professional come in, the goal is to get rid of these winter holdovers. A professional landscaping service will also make sure to inspect your fence, walkways and soil to alert you to any problems that may need to get taken care of.

While not traditionally thought of as a landscaping component, inspecting your rain gutters is a wise thing to do at this time. Chances are there are leaves and other debris that has accumulated in your gutters. This can cause your gutters to get clogged up and spill over on rainy days. In the long run this can have an impact on many aspects of your home. The malfunctioning gutters can over flow and cause damage to your roof and underlying structures. However, gutters can also overflow and cause a lot of water to pool around the foundation of your home and in your planting beds, wreaking havoc on your landscaping plans.

Pressure washing surfaces is also a good task to put on your list during this time. With heavy rain and moisture, you may find some of your stone paths, fences or other surfaces are soiled, or covered in moss. Taking time to pressure wash them can bring them back to life and clear off those surfaces.

If you have any outdoor structures such as a trellis, any fences or stone walls, this is the time to inspect them. Is your fence in need of mending in a couple of areas? Do you see some masonry stones are out of place? This is the time to fix them so your yard is ready for when you return to outdoor living. 

Trimming bushes and trees at this time, makes sense as well. It’s difficult to keep up with a regular maintenance schedule during the winter months because of the extreme weather conditions in some parts of Oregon, but as things start to warm up, you want to make sure you trim any bushes and trees that will bloom in just a few months. This is a time to spot any weak branches on trees or to check on how shrubs and other plants are maturing into your landscape design.

Around this time, you want to make sure you are getting those bulbs into the ground. Of course, you want to make sure that any danger of frost is behind you before you do this. … Read More..